Low-voltage electrical installations – Part 4-43: Protection for safety – Protection against overcurrent
standard by International Electrotechnical Commission, 07/01/2023
NACE RP0375-99
Standard Recommended Practice – Wax Coating Systems for Underground Piping Systems
standard by National Association of Corrosion Engineers, 10/10/1999
NACE TM0384-2002
Standard Test Method – Holiday Detection of Internal Tubular Coatings of Less Than 250, um (10 mils) Dry Film Thickness
standard by National Association of Corrosion Engineers, 10/01/2002
NACE RP0199-04
Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment
standard by National Association of Corrosion Engineers, 02/12/2004
IEC 61249-2-51 Ed. 1.0 b:2023
Materials for printed boards and other interconnecting structures – Part 2-51: Reinforced base materials, clad and unclad – Base materials for integrated circuit card carrier tape, unclad
standard by International Electrotechnical Commission, 05/01/2023
IEC 61784-2-14 Ed. 1.0 b:2023
Industrial networks – Profiles – Part 2-14: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 – CPF 14
standard by International Electrotechnical Commission, 05/01/2023
IEC 61158-6-24 Ed. 2.0 en:2023
Industrial communication networks – Fieldbus specifications – Part 6-24: Application layer protocol specification – Type 24 elements
standard by International Electrotechnical Commission, 03/01/2023
JIS A 5441:2023
Extruded cement panel
standard by Japanese Industrial Standard / Japanese Standards Association, 01/01/2023
NACE TM0374-2001
Standard Test Method – Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
standard by National Association of Corrosion Engineers, 03/15/2001
NACE MR0175/ISO 15156 Addenda Package
Addenda to Petroleum and Natural Gas industries – Materials for use in H2S-containing environments in oil and gas production – Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons and Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
Amendment by National Association of Corrosion Engineers, 06/14/2011